When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $78.99
Feature :
Completely sealed: Prevents moisture from being trapped inside the housing
One-way vent: Drives out moisture and avoids lens misting
Multi-surface reflectors: Increase light output & distance
PC lens: Impact resistance for an enhanced driving experience in any environment.
Fits for :
For 2005-2006 Toyota Tundra Double Cab ( 4 Full Size Door Only, Not for 2 Full Size Door)
For 2005-2007 Sequoia
Vehicle Compatibility Reference Number： #: 811500C031, 811100C031, TO2502158,TO2503158Will Not Fit Toyota Tundra Regular ( Standard ) Models With 2 Full-Size Front Doors OnlyWill Not Fit Toyota Tundra Access ( Extended ) Cab Models With 2 Full-Size Front Doors & Half Size Backward Doors
Specification :
Condition: 100% Brand New and High QualityMade of materials that meet or exceed OEM requirements
Color: Chrome Housing + Clear Lens+Amber Reflector
Light Source Type：High/Low Beam:H4(Halogen bulbs not included)
Packing List :
1 Pair of Headlights+Turn Signal Corner Lights with Amber Reflector (Driver & Passenger Side)
Note：This headlight assembly uses a Phillips screwdriver to adjust the light. For specific adjustments, please call a professional to adjust and install, thank you!
Please Note :Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1. 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.2. 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.3. 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.4. 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5. 【Test your results】
Condensation DOES NOT Indicate Crack
It's normal when there is condensation accumulated inside headlights. Condensation occurs because a lot of reasons, such as temperature differences, low-pressure areas drawing moisture in winter, etc. It won't affect the optical functions of headlights
How to Drive Away Temporary Condensation
1. Check that vents aren't blocked and switch on the low beams for about 20 mins2. Take the headlight bulb out and clear moisture3. Put a silica gel packet in the housing to soak up the moisture
WE ACCEPT THESE PAYMENT METHODS
( 10% sales tax will be applied for orders shipped to Washington state by state law )
- 30 Days easy returns satisfaction guarantee.
- Items to be returned must be in original factory condition.
- Please enclose a note about item number and order id, your eBay ID and the reason of return.