When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $64.99
Maxleve-autopart
Your best online business partner
Throttle Body For 2011 2012 2013 2014 2015 Chevrolet Matiz 1.0L 96611290VehicleCompatibility Information
2011-2015 Chevrolet Matiz 1.0L
2011 Chevrolet Spark 1.2L
Symptoms That Indicate You Need A Throttle Body Replacement
Vacuum leak
Poor or high idle
Replace throttle body
The throttle body is the part of the engine that mixes air with the fuel to allow combustion to take place. There are a number of symptoms that are often due to a failure in this part, including repeated stalling for no reason, problems with responsiveness of the acceleration pedal and stumbling or hesitation whilst accelerating.
1. Remove the Hose from the Throttle Body
Making sure that your engine is turned off, open the bonnet and locate the air filter case. When you have found this part, carefully follow the large hose using your hand until you reach the clamp connecting it to the engine. This is the throttle body. Next remove the hose from its seating and pull it away from the throttle body.
2. Detach the Air Cleaner
Remove the air cleaner from the engine, taking care to remove the hoses and ducts that supply the part with clean air. Next carefully unplug the electrical supply alongside any other sensor cables that are attached to the part, for instance in newer cars there may well be a sensor that monitors the air intake temperature, which must also be removed.
3. Deactivate Air Control and Throttle Position
When you have removed the air cleaner, deactivate the air control, which should be located on either side of the throttle body. When this is free from the throttle you should be able to disconnect the throttle position sensor, making sure that the leads are kept well away from the site of the throttle.
4. Remove Throttle Cables
Using your hands, gently ease open the throttle body to its full extent. This should give you enough slack to remove the throttle cables one by one. There may also be some water cables attached to the throttle body. If this is the case remove the hose clamps using pliers before you remove the hoses.
5. Unbolt the Throttle Body
Locate the four bolts that attach the throttle body in its place against the intake manifold and unbolt them using a socket set. Then carefully lift the throttle body off the intake manifold taking care to keep the seal between the parts intact.
6. Install the New Throttle Body
Keeping the seal carefully in place, put the new throttle body into its place and connect it to the intake manifold using the four bolts. When these are sufficiently flush against the fixing then connect the throttle cables. As a final step you’ll need to put the air cleaner back in place before connecting the hose.
After changing the part, perform the following check as a final test. Start the engine and take the car for a test drive. On your return, let the engine idle for about two minutes and listen for problems in the idle, ensuring that it is smooth. If it is not, then there may be additional problems throughout your engine.
Noticed
-Instruction is not included. Professional installation is recommended
-Accessories: You will get exactly showing in the picture
-Please confirm your original part number before purchasing
-Please contact us for anything we can help you with
Item SpecificsBrand Maxleve-autopartManufacturer Part Number MA11814101XFitment Type Direct ReplacementConnector Quantity 1Fuel System Type FIGaskets Included NoMaterial AluminumThrottle Body Actuation Type ElectricalItems Included One Complete Throttle Body w/SensorPackaging Type BoxModified Item NoCustom Bundle NoPlacement on Vehicle FrontNon-Domestic Product YesMounting Hardware Included NoManufacturer Warranty 1 YearInterchange Part Number 96439960OE/OEM Part Number 96611290Superseded Part Number Electrical Throttle Body Assembly with SensorWeight 3 LBType Throttle BodyFeatures Electronic
Payment
We only accept payment through PayPal.
ShippingWe do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
ReturnsThe guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
Contact UsWe fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!
WarningWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Maxleve-autopart
Your best online business partner
Shop CategoryStore Home throttle bodyBest Sales Throttle Body For 2021 2020 2019 Toyota Rav4 2.5L 22030F0010 USD 98.99 For Chevrolet Silverado 1500 GMC Savana 1500 4.8L 5.3L 2009-2013 Throttle Body USD 55.99 Throttle Body For 2015 2014 2013 Land Rover LR2 L4 2.0L DOHC Petrol USD 72.99 Throttle Body For 2019 2018 2017 2016 Ford F-650 F-750 6.7L BC3Z9E926A USD 84.99 For Dodge Caliber 2.0L 2.4L 2007-2012 Jeep Compass 2.4L 2007-2017 Throttle Body USD 45.99 DeliveryNewly Listed Throttle Body For 2010 2011 Saab 9-3X 2007-2011 Saab 9-3 2.0L 55354710 USD 81.99 Throttle Body For Nissan Murano 2015-2023 Quest 2015 2016 2017 3.5L 161199HP0A USD 88.99 Throttle Body For 2008 2007 2006 2005 Ford Escape 2.3L 5M6Z9E926BA USD 81.99 Throttle Body For Mitsubishi Outlander 2.4L 2013-2020 RVR 2.0L 2013-2021 USD 82.98 Throttle Body For INFINITI For Q50 For Q70 2014-2018 For FX35 2009-2012 3.5L USD 136.99 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us Throttle Body For 2011 2012 2013 2014 2015 Chevrolet Matiz 1.0L 96611290VehicleCompatibility Information
2011-2015 Chevrolet Matiz 1.0L
2011 Chevrolet Spark 1.2L
Symptoms That Indicate You Need A Throttle Body Replacement
Vacuum leak
Poor or high idle
Replace throttle body
The throttle body is the part of the engine that mixes air with the fuel to allow combustion to take place. There are a number of symptoms that are often due to a failure in this part, including repeated stalling for no reason, problems with responsiveness of the acceleration pedal and stumbling or hesitation whilst accelerating.
1. Remove the Hose from the Throttle Body
Making sure that your engine is turned off, open the bonnet and locate the air filter case. When you have found this part, carefully follow the large hose using your hand until you reach the clamp connecting it to the engine. This is the throttle body. Next remove the hose from its seating and pull it away from the throttle body.
2. Detach the Air Cleaner
Remove the air cleaner from the engine, taking care to remove the hoses and ducts that supply the part with clean air. Next carefully unplug the electrical supply alongside any other sensor cables that are attached to the part, for instance in newer cars there may well be a sensor that monitors the air intake temperature, which must also be removed.
3. Deactivate Air Control and Throttle Position
When you have removed the air cleaner, deactivate the air control, which should be located on either side of the throttle body. When this is free from the throttle you should be able to disconnect the throttle position sensor, making sure that the leads are kept well away from the site of the throttle.
4. Remove Throttle Cables
Using your hands, gently ease open the throttle body to its full extent. This should give you enough slack to remove the throttle cables one by one. There may also be some water cables attached to the throttle body. If this is the case remove the hose clamps using pliers before you remove the hoses.
5. Unbolt the Throttle Body
Locate the four bolts that attach the throttle body in its place against the intake manifold and unbolt them using a socket set. Then carefully lift the throttle body off the intake manifold taking care to keep the seal between the parts intact.
6. Install the New Throttle Body
Keeping the seal carefully in place, put the new throttle body into its place and connect it to the intake manifold using the four bolts. When these are sufficiently flush against the fixing then connect the throttle cables. As a final step you’ll need to put the air cleaner back in place before connecting the hose.
After changing the part, perform the following check as a final test. Start the engine and take the car for a test drive. On your return, let the engine idle for about two minutes and listen for problems in the idle, ensuring that it is smooth. If it is not, then there may be additional problems throughout your engine.
Noticed
-Instruction is not included. Professional installation is recommended
-Accessories: You will get exactly showing in the picture
-Please confirm your original part number before purchasing
-Please contact us for anything we can help you with
PaymentShippingReturnsContact UsWarning
We only accept payment through PayPal.
We do not ship to P.O. Boxes, APO/FPO or Military Mail Box.
The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.
We fully understand how challenging it is to be a successful transaction. If you are not satisfied with our products, please do not hesitate to tell us, our sales representatives will try the best to make you happy. Customer satisfaction is our priority consideration!
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
All right reserved.