PLAIN Chrome Stick #8009 for Hurst Shifters 68-72 Chevelle 73-81 Camaro Firebird for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $62.95

PLAIN chrome shifter stick #8009:

  • ~10.5" tall, bends 2.75" rearward & 1" left
    • 3/8"-16 knob threads
  • Forged mild steel - case-hardened for toughness, chrome-plated for beauty
    • PLAIN sides - NO LOGO - NOT a Hurst part!
      • Mating serrations for Hurst stub mount are stamped into left side
    • WARNING: Do not weld, bend, or modify a case-hardened part like this as it will create a weak spot that can lead to catastrophic failure
  • Great for custom installations - measure before you buy!
    • Mounts via 3/8" bolt holes spaced 7/8" apart - fits any aftermarket Hurst stub
    • Many off-brand shifters use 8mm stick bolts - requiring special adapter bolts
    • Mix parts carefully as proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
    • Stick length = 10.9" (distance from mount to knob) - see swap bases for fulcrum options
  • Interchanges with Hurst #5388009

IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed - sit in vehicle with tape measure while studying Hurst catalog - stick section.


This stick fits the following external linkage Hurst shifters for OE 4 speed transmissions - correct fitment requires the specified Hurst base & installation kit (see Hurst catalog):

  • 3918014 for 1968-1972 Chevelle & El Camino w/ muncie trans, w/ & w/o console
  • 3918791 for 1973-1981 Camaro & Firebird w/ muncie or B-W trans, w/ console
  • 3918794 for 1974-1981 Camaro & Firebird w/ B-W trans, w/o console

NOTE: These part numbers may be specific to the transmission, engine, or interior trim (console etc) and may not fit all models mentioned. Intended for aftermarket Hurst shifters - most OE factory shifters from this era (including Hurst) are NOT compatible with a bolt-on stick; they use a different connection.


This stick is also used by the following Hurst & Core internal rail shifters - matching base required, not compatible with stock shifters (see complete kits):

  • 3910112 for 1996-2003 S10 Chevy truck w/ NV1500
  • 3910113 for 1998-2005 S10 Chevy truck w/ NV3500
  • Core Shifters kit for 1986-1993 Mazda B-series truck
  • Core Shifters kit for 1988-1990 Ford Ranger & Bronco II


Parts Search:


Follow