Mass Air Flow Meter Sensor MAF for 1996-98 BMW 328i 328iS 328iC 328 Series for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $22.67

  • Specification:
  • Condition: 100% Brand New Mass Air Flow Sensor
  • Replacement: Directly Plug-in Replacement
  • Material: Plastic
  • Color: As picture showed
  • Warranty: 1 Year
  • Note: Our mass air flow sensor is the same with the pic showed in the page
  • Compatibility/Fitment:
  • 1998-99 BMW 323iC1998-99 BMW 323iS1996-98 BMW 328i1996-99 BMW 328iC1996-99 BMW 328iS1997-98 BMW 528i1996-99 BMW M31999-00 BMW Z3 L6 3.2L1997-98 BMW Z3 L6 2.8L
  • FAQ about the MASS AIR FLOW (MAF) SENSOR:
  • Cars-kingdom

    Your best choice

    Mass Air Flow Meter Sensor MAF for 1996-98 BMW 328i 328iS 328iC 328 Series

    Specification:

    Condition: 100% Brand New Mass Air Flow Sensor

    Replacement: Directly Plug-in Replacement

    Material: Plastic

    Color: As picture showed

    Warranty: 1 Year

    Note: Our mass air flow sensor is the same with the pic showed in the page

    Compatibility/Fitment:

    1998-99 BMW 323iC
    1998-99 BMW 323iS
    1996-98 BMW 328i
    1996-99 BMW 328iC
    1996-99 BMW 328iS
    1997-98 BMW 528i
    1996-99 BMW M3
    1999-00 BMW Z3 L6 3.2L
    1997-98 BMW Z3 L6 2.8L

    FAQ about the MASS AIR FLOW (MAF) SENSOR:

    FAQ1:WHAT does a MAF Sensor do?
    The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

    FAQ2:WHERE are these sensors located?
    The Mass Air Flow sensor is located in the intake ducting after the air filter.

    Steps:How to replace the MASS AIR FLOW SENSOR(MAF):
    1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    5. CAREFULLY plug the harness connector lead into the MAF sensor.

    Contact us:

    Any question or problem, please contact us.

    Package Included:

    1pcs of brand newMass Air Flow Sensor/Meter (MAF)


    Item SpecificsBrand CKmManufacturer Part Number CK11404101mType Mass Airflow Sensor (MAF Sensor)Air & Fuel Sensor Type MASS AIR FLOW Sensor/MeterWarranty 1 YearInterchange Part Number 5WK9600, 5WK9600Z, 5WK9617, 213-3360, 2133360Reference Part Number 74-10043, 7410043, 207084, 228299Other Part Number 13621703275, 13221702078Fitment Type Direct ReplacementPlacement on Vehicle FrontHousing w/ housingPin Number 4 pinsItem Color BlackWith Housing Yes
    Payment 1.We only accept PayPal.2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.Shipping 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)2. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service3.We do not offer local pickups.4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.4. Return shipping is to be paid by the Buyer.

    Contact Us

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Cars-kingdom

    Your best choice

    DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Mass Air Flow Meter Sensor MAF for 1996-98 BMW 328i 328iS 328iC 328 Series

    Specification:

    Condition: 100% Brand New Mass Air Flow Sensor

    Replacement: Directly Plug-in Replacement

    Material: Plastic

    Color: As picture showed

    Warranty: 1 Year

    Note: Our mass air flow sensor is the same with the pic showed in the page

    Compatibility/Fitment:

    1998-99 BMW 323iC
    1998-99 BMW 323iS
    1996-98 BMW 328i
    1996-99 BMW 328iC
    1996-99 BMW 328iS
    1997-98 BMW 528i
    1996-99 BMW M3
    1999-00 BMW Z3 L6 3.2L
    1997-98 BMW Z3 L6 2.8L

    FAQ about the MASS AIR FLOW (MAF) SENSOR:

    FAQ1:WHAT does a MAF Sensor do?
    The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire. The PCM uses this signal primarily for fuel control.

    FAQ2:WHERE are these sensors located?
    The Mass Air Flow sensor is located in the intake ducting after the air filter.

    Steps:How to replace the MASS AIR FLOW SENSOR(MAF):
    1. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    2. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    3. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    4. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    5. CAREFULLY plug the harness connector lead into the MAF sensor.

    Contact us:

    Any question or problem, please contact us.

    Package Included:

    1pcs of brand newMass Air Flow Sensor/Meter (MAF)


    Payment 1.We only accept PayPal.2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages. Shipping 1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)2. Fast shipping:All our packages use USPS First Class/UPS/Fedex... Package Service3.We do not offer local pickups.4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction! Returns 1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.4. Return shipping is to be paid by the Buyer.

    Contact Us

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.


    All rights reserved.




    Parts Search:


    Follow