When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $1343.86
- Official eBay Store
- Home
- About Us
- Feedback
- Contact Us
The CPR6 high-performance Alloytec V6 inlet manifold is the result of intense development and testing, as well as years of experience with cylinder head airflow research.
Made from high-quality automotive-grade cast alloy, the CPR6 boasts far greater breathing and airflow characteristics than the factory product. Thanks to precision-machined mating surfaces, you're guaranteed proper fitment, right in place of the original manifold and using the factory bolts and hoses.
It'll even fit under your original engine cover!
By simply providing your Alloytec V6 with more air and a cleaner intake path, you'll enjoy power gains of 11%; even on a stock engine! Through extensive dyno testing on real-world vehicles, we've seen gains of up to 60% on modified Alloytec engines.
Dyno Graph - Stock/Factory Engine
As you can see clearly from the first graph, gains between 20 and 25rwhp are delivered, even on a stock engine and without an expensive custom tune!
Dyno Graph - Modified Race Engine
Graph 2 shows the before and after results of fitting a CPR6 Alloytec V6 intake manifold to a highly modified Alloytec. As you can see, even with fully tuned engines, you'll be 45hp off the pace without the CPR6 manifold.
Fitment of the CPR6 manifold is dead easy and can be performed by DIY enthusiasts of all skill levels using simple tools in around 2 hours!
Not only will your efforts unlock more horsepower, but you'll even save money on your weekly fuel bill, under normal driving conditions. On a standard VE sedan fitted with nothing but a CPR6 intake manifold, testing showed a best of just 8.6L/100km. There's no easier, more potent performance modification you can make to your Alloytec.
If you're looking for that extra edge, when coupled with our 12mm manifold insulators, not only will you raise the tail end of the dyno graph from the CPR6 but peak torque will begin lower in the RPM range. Truly awakening the potential of the under-estimated Alloytec V6.
Contents:
- 1 X CPR6 high-performance Alloytec V6 intake manifold
- 1 X Bolt pack
Vehicle Fitment Guide
Note: Performance CPR6 intake manifold for Holden VZ Alloytec can be purchased through other listing.
Please remember to check out our other performance products for sale
* You may receive an Address Confirmation email in case our system is unable to verify your delivery address based on our address database *
E554
Returns Policy
At Mace Engineering Group, we take great care in packaging of your products appropriately to ensure that they arrive in perfect condition. If for any reason your product is damaged during shipment, please contact us immediately to arrange for the return of your product(s) within 14 days. We will then provide you with a replacement product as soon as possible.
If you receive a product with manufacturing defect, it must be returned within 14 days. After appropriate testing, if it is found that the defect is due to misuse, willful damage, unauthorized repair or tampering with the product by the customer, return will not be accepted by Mace Engineering Group. Strictly no returns/refunds will be given due to buyer's change of mind or remorse. This is in compliance to the ACCC warranties and refunds.
Re-Stocking Fee & Refunds
If a purchased item is returned due to buyer's remorse or misorder, 10-15% re-stocking fee will be applicable at our discretion, depending on the item.
Paypal has changed its refund policy and will no longer refund the fees deducted for the original transaction, therefore, Mace Engineering Group will deduct the 2% fee while making a partial or full refund other than the restocking fee, if applicable
Postage cost is non-refundable.
Domestic Orders
- Orders typically take 1-2 business days to prepare and process prior to dispatch.
- Freight maytake 1-7 business days from the date of dispatch to delivery within Australia.
- Orders can also be picked up directly from us on business days. Please email us.
- Orders are neither dispatched nor delivered on weekends.
International Orders
- Shipping will be calculated automatically based on the delivery address.
- Orders outside of Australia may take up to 10 days.
- You will be responsible for any applicable taxes and/or duties and will need to be paid upon delivery.
**Saturday and Sunday ARE NOT business days**
Product Warranty
Mace Engineering Group products are covered by a 1 year warranty, unless otherwise specified in the ad or written agreement from Mace Engineering Group.
Terms of Warranty
Customer must return the defective item(s) first, with a full description of the problem. Appropriate tests will be conducted to determine the authenticity of the defects and claims. Once, Mace Engineering Group is satisfied, identical items(s) will be sent out to the customer.
Please ensure proper packaging of the product to prevent any damage while in transit, as goods are at owner's risk.
QUICKLINKS
- Home
- About Us
- Contact Us
- ARP Bolts
- Balancer
- Bolts
- Belts & Pulleys
- Cam And Valve Train
- Cold Air Intakes / Insulators
- Conrods
- Cooling
- Cylinder Heads
- Engine Mount
- Gaskets
- Ignition Coils
- Injector Repair Kit
- Manifold Related
- Oil Related
- Pistons
- Sensors
- Service Kit
- Spark Plugs
- Suspension
- Timing Chains
- Throttle Bodies
- Upgrade Kits
- Water Pumps