When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $179.99
Headlights Assembly Headlamp DRL LED Tube Pair for 2008-2017 Toyota Sequoia & 2007-2013 Toyota Tundra Lamps
Item Description:APPLICATION:
For 2007-2014 Toyota Tundra
For 2008-2017 Sequoia
FEATURE:
High Beam Bulb Type: H1 (Bulbs are included)
Low Beam Bulb Type: H1 (Bulbs are included)
Turn Signal: 4157NA (Bulbs NOT included)
LED daytime running lights (DRLs)
Placement on Vehicle: Left, Right, Front
Made of materials that meet or exceed OEM requirements
Black Housing Clear Lens With Amber Reflector
Type: LED Tube Headlight
**NOTE: The interface may needs to distinguish between positive and negative poles.If it doesn't light up at the first time, it needs to be unplugged and rotated for half a turn before being plugged in. Any question please feel free to contact us.
PACKAGE INCLUDES:
1 Pair LH (Driver Side) + RH (Passenger Side) Headlights
INSTALLATION GUIDE:
Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5. Test your results.
More Display:On Mar 26, 2023 at 20:16:16 PDT, seller added the following information:On Mar 15, 2024 at 00:50:24 PDT, seller added the following information: