When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $1410.00
Fits 2003-2010 Dodge Viper RWDExtreme by default- Normally, there is a standard version of the coilovers, and an extreme low version (as in two separate coilover kits, with extreme low allowing for about an extra inch of lowering). Extreme by default means that only one coilovers kit is made. Certain vehicles already sit very low from the factory, so it's only possible to safely lower them a few inches. This means an extreme low version where the vehicle sits even lower is not possible, and only the standard coilovers are offered. Since the standard coilovers will lower like extreme low would (due to the small gap/lowering potential), it's called extreme by default.BR SERIES
The BR Series is the perfect choice for street driving and the occasional road course or autocross duty. With easily accessible adjustment knobs for fine-tuning compression and rebound, ride height adjustment independent of shock stroke, and spring preload, running a performance coilover system has never been easier. The driver chooses how low or high the vehicle sits (no preset ride height here!), and BC Racing patented concave lower locking rings will lock it securely in place. Most systems can be upgraded to pillowball mounts to provide the most feedback possible from the suspension and sharpen steering response. BC Racing front camber plates allow a driver to get the perfect alignment setup without compromise. Each of these features is offered, while providing a strong, attractive coilover system at a reasonable price.
FEATURES:
- MONO-TUBE SHOCK DESIGN
- LINEAR PISTON AND DAMPING CURVE
- HEIGHT ADJUSTMENT VIA SHOCK BODY, NOT SPRING
- 30-CLICKS OF SIMULTANEOUS DAMPING ADJUSTMENT (COMPRESSION/REBOUND)
- CUSTOM SPRING RATES, EXTREME LOW, AND SWIFT SPRINGS AVAILABLE FOR MOST APPLICATIONS
- CUSTOM VALVING AND/OR VALVING PAIRED FOR CUSTOM SPRING RATES
- FULLY REBUILDABLE WITH ALL PARTS AVAILABLE FOR PURCHASE
- FRONT CAMBER PLATES STANDARD ON APPLICABLE KITS*
- REAR CAMBER PLATES AVAILABLE FOR APPLICABLE KITS*
- 2-YEAR LIMITED WARRANTY AGAINST MANUFACTURERS DEFECT