When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $34.63
Wheel Spacer Specifications:
Thickness: 1 inch / 25mm
Vehicle Bolt Pattern: 5x4.5 inch/ 5x114.3mm
Wheel Bolt Pattern: 5x4.5 inch/ 5x114.3mm
Thread Size: 1/2\"x20
Center Bore:2.78 inch / 70.5mm
Hub Centric: Yes
Fitment:
Ford:
Ford Bronco 1982-1990
Ford Crown Victoria 1992-2007
Ford Edge 2007-2011
Ford Explorer 1991-2010
Ford Explorer Sport Trac 2001-2005&2007-2010
Ford Mustang 1967-1973&1994-2014
Ford Ranger 1983-2011
Ford Ranger ELECTRIC 1998-2002
Lincoln:
Lincoln Aviator 2003-2005
Lincoln Town Car 1982-2004
Mazda:
Mazda B2500 1998-2001
Mazda B3000 1994-2007
Mazda B4000 1994-2009
Mazda Navajo 1991-1994
Mercury:
Mercury Mountaineer 1997-2010
Package include:
2Pcs Wheel Spacers Adapters
How to choose the correct wheel spacers:
STEP. Check 3 specifications
The following is the easy and simple way tocheck the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer\'s diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2\"x20, 9/16\"x18, please make sure the studs of wheel spacers is the same as the vehicle\'s, otherwise the spacer will not fit.
How to install the wheel spacers:
1).IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER!Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
Important Notes:
Please make sure that these are the correct application for your vehicle. And confirm the PCD parameters of wheel spacers are consistent with the item parameters.We do not guarantee any fitment onto any vehicle,we only guarantee that you will receive the item described as the above. Returns are only accepted if unused and not installed.(Returns ARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
Installation by a trained professional is highly recommended.
Please verify this is the correct application for your vehicle before ordering, we only guarantee you receive what is described above.
Some vehicles may require modifications to make this type of adapter work properly.
Be aware that the studs on the vehicle cannot stick out past the face of the back adapter plate, you may need to modify them by grinding/cutting/trimming.
We make no promise or guarantee that this item is compatible with your vehicle and/or wheels.
Vehicle compatibility, if listed, is used to match the vehicle bolt pattern with the adapter only.
The adapters must be installed correctly, Lug Nut Guys or the manufacturer cannot be held responsible for improper installation causing failure.
Please ask if you have any questions, we\'re here to help!
It is buyer responsibility to provide correct shipping address before purchasing.
Buyer is responsible for any reshipping cost due to wrong or undeliverable addresses.入Payment Items are shipped within 1-2 business days.
Damaged item due to shipping must reported to us within 48 hours of delivery in order to place claim with shipping company. Returns1：contact seller first by email2: send images : including outer package & scan label & item itself & with complete accessories etc
necessary condition:
one : Items have not been used.
two : outer package without any damage.3: For returns, please contact customer service for a return shipping label.
4: item delivered -payment repay1Returns or exchanges will be subject to a 15% restocking fee on the original purchase.2. Returns or exchanges due to shipping issues will be borne by the sellerPriority：
In the following cases, the shipping cost will be undertake by buyers
1: order accidently
2: find better price
3: change mindNotice：
accessory missing/ quality issue/ shipping damage.etc
please contact us for good solution first instead of opening return dispute. Our professional customer service team can give you a satisfactory solution! If you have any problem, please feel free to contact us from Monday to Friday.
If you want to customize at bulk order, please contact us to find cheaper price.