When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $59.99
Wheel Spacer Specifications
- Quantity: Four (4)
- Thickness: 20mm
- Bolt Pattern: 5x4.5" (5x114.3mm)
- Center Bore: 64.1mm
- Stud/Nut Thread Pitch: M12x1.5
- 1997-2003 CL; 2005-2011 CSX; 2012-2021 ILX
- 2001-2006 2014-2016 MDX; 1997-2001 Integra(only fit Type R)
- 2006-2021 RDX; 2003-2014 TSX; 1995-2004 RL
- 2014-2020 TLX; 2002-2006 RSX; 1995-2008 TL
- 1998-2021 Accord(only fit 5lugs)
- 2010-2011 Accord Crosstour; 2016-2021 BR-V
- 2006-2021 Civic; 1997-2021 CR-V; 2011-2017 CR-Z
- 2011-2016 Crosstour; 2003-2011 Element; 2015-2021 HR-V
- 2018-2021 Insight; 2005-2006 Integra
- 2003-2006 MDX; 1994-2004 Odyssey
- 2003-2008 Pilot; 1997-2001 Prelude
- Positions your wheels 20mm outward
- Allows installation of wider wheels & tires
- Increases your vehicle's track-width
- Hydraulic Pre-Pressed Studs eliminate the risk of vibrations
- Improves the look of your vehicle
- Following your vehicle owner's manual, proper raise the vehicle and support it using adequately load-rated jackstands.
- Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don't continue with this installation.
- Remove any wheel visible rust from the mating flange on the vehicle's rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper seating of the spacer/adapter.
- If proper seating can be achieved, apply provided thread locker to vehicle's studs and mount the wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
- Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
- DO NOT USE AN IMPACT WRENCH.
- Check that wheel and tire clearance allow for full steering(lock-to-lock).
- If there is no interference, vehicle may be lowered.
- Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles.