MPX Dual Exit Exhaust System (No Mufflers) - fits '13-'16 Dodge Dart for Sale

Price: $713.85

This exhaust system is perfect for 1.4L Turbo Darts, and 2.0L / 2.4L Darts equipped with the stock header. If you plan on installing the MPx Header for use with the 2.0L / 2.4L engine, we highly recommend you consider the MPx Exhaust System with two rear mufflers.

Exhaust Features:

  • T304 Stainless Steel Piping
  • All flanged system for less leakage compared to slip fit systems.
  • 2.25" Piping - Dyno tested to be the optimal diameter for all around performance. 2.50" Piping made slightly more top end power, but lost power over approximately 85% of the RPM curve, which is not good for street use.
  • Bolts to the downpipe off the header (2.0L / 2.4L) or the downpipe off the turbo (1.4L), and uses the factory steel hangers.
  • Comes complete with gaskets, bolts, and two new rear rubber hangers.
  • Designed to tuck into the exhaust tunnel better than most other exhausts, for better ground clearance for lowered Darts.
  • Fits great into dual tip bumper equipped Darts and the Mopar Rear Diffuser. Don't have dual tips? No problem, you can swap out the rear diffuser panel with the OEM rear panel and the two Mopar OEM rear tips, or buy the Mopar rear diffuser and the two Mopar rear tips.
  • Complete bolt on from the B pipe under the engine to the back. You'll have no check engine lights with this exhaust.

This exhaust system fits the following vehicles:

  • 2013-16 Dart 1.4L Turbo
  • 2013-16 Dart 2.0L w/ Stock Header
  • 2013-16 Dart 2.4L w/ Stock Header

Please note: photos of the exhaust show a single resonator muffler on the B pipe. Around 2018 we revised this exhaust to be a little less raspy by adding a second resonator. So even though photos on this page show a single resonator on the B pipe, it will come with two straight through inline resonators.



Parts Search:


Follow