FO1014107 Front Bumper Cover Primered Fit For 2011 2012 2013 2014 Ford Edge for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $120.89

  • Description :Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs - an OE replacement product for your damaged or aged factory part.
  • Package Include:
  • Front Bumper Cover*1
  • Note:
  • Etecgo

    FO1014107 Front Bumper Cover Primered Fit For 2011 2012 2013 2014 Ford Edge

    Description :
    Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs - an OE replacement product for your damaged or aged factory part.

    Package Include:

    Front Bumper Cover*1

    Note:

    • In order to deliver the bumper to your hand as soon as possible, The bumper will be placed in a special custom box, but it will not affect its performance.Brand New in the Box - Fit and Quality Guaranteed!
    • If in any case the lip became warped, simply lay it on a flat surface under the sun or use a heat gun gently heat up the warped area. The poly urethane material will restore back to its original shape when heated and stays that way after it cools down.

    Reminder:

    • Outdoor Method:

    1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
    2. Open the packaging and remove the bumper cover.
    3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
    4. Let the bumper cover sit in the sunlight for three hours.
    5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.

    • Indoor Method:

    1.Use the cardboard packaging as your work surface and place the bumper cover on top.
    2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
    3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
    4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.


    Item SpecificsBrand etecgoManufacturer Part Number 454365Type Bumper CoverPlacement on Vehicle FrontColor UnfinishedMaterial PlasticFinish PrimeredManufacturer Warranty 1 YearInterchange Part Number FO1014107Condition New
    Payment

    Delivery details

    Terms of sales

    1.This item come with a warranty.The warranty covers against defective workmanship only,misuse or willful damage will render the warranty void.

    2.If the item you have received is defective in any way,please email us for return instructions.We do not allow returns without first requesting an RMA (Retruned Merchandise Authorization).

    3.If you have any questions,please contact us via ebay message system. Please DO NOT leave a negative feedback before contact us,We will reply you in 24 hour. We are prompt that we be able to resolve any issue you may have.

    Contact Us

    If you have problem, please do not hesitate to contact us by eBay message. We will respone ASAP.
    We appreciate feedback from our customers and strive to maintain a rating as close as possible to 100% perfect "Five-Star." If anything about your transaction did not meet your expectations, please let us know and provide us with the opportunity to fix our issues before you leave feedback. Customer service is very important to us , hope you can enjoy our store.

    Etecgo

    DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home Battery◈Others TV Parts & Components Cell phone Parts & Components Video Games & Consoles Suspension Lighting & Lamps◈Fog Lights◈Headlight◈Turn Lights◈Moto Lighting & Lamps◈Others◈LED Lights Carburetor◈Lawn Mowers Carburetor◈String Trimmers Carburetor◈Blower Carburetor◈Snow Blower Carburetor◈Saw Carburetor◈Motorcycle Carburetor◈Automobile Carburetor◈Others◈Rebuild kits◈ Gaskets Control Arms & Parts Auto Valve◈Pressure Relief Valve◈Air Idle Valve◈VVT Valve◈Transmission Solenoids◈Control Valve◈Valve Body◈EGR Valve◈Others Motorcycle Valve◈Motorcycle fuel Switch Valve Module◈Headlight Driver Module◈Fuel Pump Module◈Fan Control Module◈Others Fuel Injector Brakes & Brake Parts◈Brake Master Cylinder◈Clutch & Clutch Parts◈Motorcycle Hand Brake Handle◈Motorcycle Brake Cable◈Motorcycle Brake Pads◈Others Car Repair Kit Auto Engine System◈Valve Cover & Gasket◈Oil Cooler◈Engine Timing Cover◈Valve Push Rod◈Filter Housing &Accessories◈Engine Rocker Arm Shaft Sleeve◈Valve Cover Breather◈Oil Scale◈Others◈Engine Mounts◈Valve Lifters & Components◈Automobile Oil Filter◈Camshaft◈Engine Oil Pan Auto Ignition System◈Car Ignition Coil◈Spark Plug Protective Cover◈Ignition Switch◈Others Auto Hub◈Locking Hub◈Hub Bearing Motorcycle Ignition System◈Motorcycle Ignition◈Motorcycle Ignition Coil◈Motorcycle Fuel Switch◈Motorcycle Hand Plate◈Motorcycle Ignition Switch◈Motorcycle Starter Fitting◈Motor Electromagnetic Starter Motorcycle engine system◈Piston Cylinder Fittings◈Camshaft◈Others Auto Actuator◈Air Conditioner Actuator◈Door Lock Actuator◈Eccentric Shaft Actuator◈Hood Catch◈Clutch Actuator◈Fuel Door Opener Actuator◈Others◈Automobile 4WD actuator Auto Motor◈Transmission stepper motor◈Power Window Lift Motor◈Transfer Case Gear Motor◈Front Running Board Motor◈Blower Motor◈Others◈Convertible Top Motor Auto Inlet & Outlet System◈Air Filter◈Intake Exhaust Valves◈Throttle Body◈Exhaust And Intake Pipes◈Turbocharger◈Others Auto Circuit Wiring Harness◈Sensor Harness◈Body Wiring Harness◈Battery Terminal◈Others◈Automotive Circuit Module Transmission System◈Chain◈Shaft◈Gear◈Tensioner◈Belt◈Steering Power Hose◈Others Auto Switch◈Door Power Window Switch◈Neutral Safety Switch◈Combination Lever Switch◈Parking Brake Switch◈Others◈Light Switch◈Car Seat Switch◈A/C Switch Motorcycle Control System◈Gearbox Shift Line◈Rectifier◈Relay◈Voltage Regulator◈Others Auto Sensor◈Mass Air Flow Sensor◈Oxygen Sensor◈Air Pressure Sensor◈Throttle Position Sensor (TPS)◈Vehicle Speed Sensor◈ABS Wheel Speed Sensor◈Oil Pressure Sensor◈MAP Sensor◈Others Motorcycle Pump◈Fuel Pump◈Brake Calipers◈Others Auto Interior◈Plastic Rivets Fasteners◈Cargo Covers◈Center Overhead Consoles◈Cup Holder◈Inside Door Handle◈Inner Door Panel Handle◈Cigarette Lighter◈Storage Box◈Air Conditioner Vent◈Others◈Door Panels◈Dash Parts◈Seat Belts & Parts◈Moldings Trims◈Seat Cover◈Sun Visors◈Air Horn◈Seat Parts Exterior Trimming Parts◈Roof Rack◈Running Boards/Side Steps◈Bmuper Grille◈Fender Flares◈Front Bumper Grille Guard◈Rear Bumper Grille Guard◈Door Handle◈Fuel tank cap◈Hinge◈Front Bumper◈Rear Bumper◈Motorcycle Decoration◈Others◈Window Visors◈Windshield Wiper Blades Auto Pump◈Fuel Pump◈Water Pump◈Air Pump◈Power Steering Pump◈Oil Pump◈Others◈Vacuum pump Cooling System◈Cooling Fan◈Radiator◈other Air Conditioning & Heat Auto Fuel System◈Fuel Injector Connection Kit◈Fuel Pipe Kit & Parts◈Filler Pipe◈Auto Tank OtherHot Item 1/4 OD 25 Ft Brake Line Tubing Kit Iron Plating Copper & 16 Fittings USD 17.97 ROUND Rubber Arm Pads for BENDPAK lift DANMAR Lift SET OF 4 HD slip on # 5715017 USD 31.35 100pc Clips for Hole Plastic Rivets Retainer Fender Bumper Push Pin Fastener 8mm USD 6.09 Front bumper 3PCS RH Side Chrome Trim Set For 2016-2020 Mitsubishi Outlander USD 35.08 For Yamaha YFS200 Blaster 1988 1989 1990-2006 Black Vinyl Clutch Cable 05-0119 USD 9.88 Picture

    New List Item T3 Titanium Fiber Turbo Blanket Heat Shield Barrier Turbocharger Cover Wrap USD 17.37 1332492 1332802 ATV Rear Differential Assembly for Polaris Sportman 550 850 1000 USD 249.00 4X Ignition Coils For Toyota Camry Lexus Scion Solara Rav4 TC 2.4L UF333 USD 37.59 Rear Stabilizer Sway Bar Bushing For Polaris Ranger 800 4X4 6X6 2010-12 5432785 USD 15.79 For Jeep Wrangler JK/JKU Rubicon Electric Locker Wire Harness Axle P5155359 USD 22.50 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us FO1014107 Front Bumper Cover Primered Fit For 2011 2012 2013 2014 Ford Edge

    Description :
    Manufactured from top quality components, this is your best option and inexpensive replacement for your rebuild, repair, and maintenance needs - an OE replacement product for your damaged or aged factory part.

    Package Include:

    Front Bumper Cover*1

    Note:

    • In order to deliver the bumper to your hand as soon as possible, The bumper will be placed in a special custom box, but it will not affect its performance.Brand New in the Box - Fit and Quality Guaranteed!
    • If in any case the lip became warped, simply lay it on a flat surface under the sun or use a heat gun gently heat up the warped area. The poly urethane material will restore back to its original shape when heated and stays that way after it cools down.

    Reminder:

    • Outdoor Method:

    1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
    2. Open the packaging and remove the bumper cover.
    3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
    4. Let the bumper cover sit in the sunlight for three hours.
    5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.

    • Indoor Method:

    1.Use the cardboard packaging as your work surface and place the bumper cover on top.
    2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
    3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
    4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.

    Item SpecificsBrand :etecgoManufacturer Part Number :454365Type :Bumper CoverPlacement on Vehicle :FrontColor :UnfinishedMaterial :PlasticFinish :PrimeredManufacturer Warranty :1 YearInterchange Part Number :FO1014107Condition :New

    PaymentDelivery detailsTerms of salesContact Us

    1.This item come with a warranty.The warranty covers against defective workmanship only,misuse or willful damage will render the warranty void.

    2.If the item you have received is defective in any way,please email us for return instructions.We do not allow returns without first requesting an RMA (Retruned Merchandise Authorization).

    3.If you have any questions,please contact us via ebay message system. Please DO NOT leave a negative feedback before contact us,We will reply you in 24 hour. We are prompt that we be able to resolve any issue you may have.

    If you have problem, please do not hesitate to contact us by eBay message. We will respone ASAP.
    We appreciate feedback from our customers and strive to maintain a rating as close as possible to 100% perfect "Five-Star." If anything about your transaction did not meet your expectations, please let us know and provide us with the opportunity to fix our issues before you leave feedback. Customer service is very important to us , hope you can enjoy our store.


    All rights reserved.




    Parts Search:


    Follow