4PCS 2" 6x5.5 Wheel Spacers 12x1.5 for Toyota Tacoma 4Runner Tundra FJ Cruiser for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $84.99

FITMENTCompatible with

  • 2004-2012 Chevy Colorado
  • 2004-2012 GMC Canyon
  • 1989-2021 4Runner
  • 2007-2020 FJ Cruiser
  • 2000-2006 tundra
  • 1995-2021 Tacoma 4WD/Pre-Runner/VVT-i (not fit 2WD S-Runner or X-Runner)

  • 1982-1997 Land Cruiser
  • 2004-2019 Ventury
  • 2001-2007 Sequoia
  • 2005-2021 Fortuner
  • 2003-2009 GX470
  • 2010-2021 GX460

Wheel Spacer Specifications
  • Quantity: Four(4)
  • Thickness: 2 inch
  • Vehicle Bolt Pattern: 6x5.5" (6x139.7mm)
  • Wheel bolt pattern: 6x5.5" (6x139.7mm)
  • Center bore: 108mm
  • Thread Pitch: 12x1.5

ET lug nuts

We specially use extended ET lug nuts,ET lug nuts has enough shank to fit properly with wheel spacers to ensure safety and stability during driving.

6061-T6 aluminum alloy

Our products are forged from 6061-T6 aluminum alloy, and each product is treated with surface oxidation, which greatly enhances the hardness and corrosion resistance of the products.

CNC automatic processing

We use CNC automatic processing technology to ensure the high precision and stability of each product, so that it can be perfectly installed in your vehicle,Giving your vehicle a more aggressive appearance,last the life of your vehicle.

How to measure the fender gap to choose suitable thickness?

  • Use the measuring device to measure from the outer of the tire to the inner fender lip,take the minimum gap after repeated measurements.
  • To avoid touching and causing friction, the thickness of spacers should be less than the fender gap,(The maximum thickness of spacer =the minimum fender gap - 12mm ) is recommended.

Installation Advice:

  • Clean the studs thoroughly and remove any excessive dirt, oil, grease etc.
  • Highly recommended use torque wrench while installing wheel spacers.
  • Do not use automatic screwdrivers while installing wheel spacers.
  • Please check all lug nuts and re-torque them after driving 20-60 miles,then re-torque again after driving 2000-3000 miles.
  • Highly recommended professional installation.

  • AFTER-SALES: If there are any problems during the purchase of the product,Please let us know,our professional team will deal with and help you to solve the problem ASAP!


Parts Search:


Follow