When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $80.74
- 5 Lug Wheel Spacers
- 6 Lug Wheel Spacers
- 8 Lug Wheel Spacers
- BMW/VW/AUDI Wheel-Spacers
- ATV Wheel Spacers
- Porsche Wheel Spacers
- Chevrolet Wheel Spacer
- Ford Wheel Spacer
- Jeep Wheel Spacer
- Chevy Leveling Lift Kit
- Dodge Leveling Lift Kit
- Ford Leveling Lift Kit
- Toyota Leveling Lift Kit
- Full Leveling Kit
- Bmw
- Honda
- Nissan
- Chevrolet
- Dodge
- Ford
- JEEP
- M14x1.5 Spike Lug Nuts
- 9/16 Spike Lug Nuts
- 1/2 Spike Lug Nuts
- M12X1.5
Bolt Pattern: 5x100 to 5x100
Centerbore: 56.1mm
Thread Pitch: 12x1.25mm
Thickness: 1 inch /25.4mm
Spacer Type: Hub centric w/ Hub lip
Quantity:4 PC Wheel Spacer
The following model is main model.it is not complete
if you do not sure,please check model by ebay Compatibility.or you could contact us any time~
Subaru
2002-2007 Baja
2012-2019 BRZ
2013-2019 Crosstrek
2008-2018 Exiga
1997-2018 Forester(not fit 2019)
1992-2019 Impreza
2008-2011 Impreza Anesis
2011-2019 Impreza G4
2002-2011 Impreza Outback Sport Wagon 4-Door
2011-2019 Impreza Sport
1992-2014 Impreza WRX
1992-2004 Impreza WRX STI(not fit 2005-2014)
1989-2014 Legacy(not fit 2015-2019)
1998-2014 Legacy B4(not fit 2015-2019)
2000-2013 Outback(not fit 2015-2019)
1988-1991 XT6
2012-2019 XV
2013-2016 XV Crosstrek
2012-2019 86( GT 86)
Scion
2012-2016 FR-S
Saab
2004-2006 9-2x
- IMPROPER INSTALLATION, INCOMPATIBILITY, OR FAILURE TO RE-TORQUE HARDWARE CAN CAUSE LOSS OF WHEEL AND RESULT IN SERIOUS ACCIDENT, INJURY OR DEATH
- A torque wrench is required. Don't use air or impact wrenches-For 1.5 inches or less thickness
- If the stock studs are longer than the adapters, and the wheels do not have hollow spot in them,
you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.
- Re-torque all lug nuts after 25-50 miles of driving, then again after 1-2,000 miles.
- Measure wheel gap for clearance. You'll need at least 5mm of clearance to prevent wheel/tire from touching
the fenderThe outside of the tire sidewall is usually the widest point of your wheel and tire (unless the tires are 'stretched' across the rim). With the tire/wheel on the car and the car on the ground at its desired ride height, place a straight edge or ruler between the outermost tire spot and the inside of the fender lip. The distance is your wheel gap and your spacer size. This is the max spacer size so it would be a good idea to choose a spacer one size lower to account for suspension travel.