Price: $59.99
- 2005-2006 Saab 9-2X
- 2013-2016 Scion FR-S
- 2003-2006 Subaru Baja
- 2013-2020 Subaru BRZ
- 1998-2018 Subaru Forester
- 1993-2003 Subaru Impreza
- 2004-2021 Subaru Impreza (Will not fit STI)
- 1990-2014 Subaru Legacy
- 2000-2013 Subaru Outback
- 2017-2020 Toyota 86
Applications:
- 2005-2006 Saab 9-2X
- 2013-2016 Scion FR-S
- 2003-2006 Subaru Baja
- 2013-2020 Subaru BRZ
- 1998-2018 Subaru Forester
- 1993-2003 Subaru Impreza
- 2004-2021 Subaru Impreza (Will not fit STI)
- 1990-2014 Subaru Legacy
- 2000-2013 Subaru Outback
- 2017-2020 Toyota 86
Feature:
- Precisely Machined: Forged 6061 T6 Aluminum CNC machined heavy duty spacers and studs for safety with ISO/DIN 10.9 (SAE Grade 8).
- Forged spacers are more heavy duty and Durable than casting, stronger and safety package with Foam inner.
- It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle.
- Be sure to torque the lug nuts to manufacturer specifications.
- Avoid an impact wrench; improper usage may cause damage to components.
- Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
- No returns or exchange once installed.
​
How to measure the fender gap to choose suitable thickness?
(1)Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
(2)Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
How to Install Wheel Spacers?
- Always make sure you are installing wheel spacers/adapters that are designed for your vehicle. Never use wheel spacers/adapters which do not fit properly.
- Park your vehicle on a hard, level surface. Break loose, but DO NOT REMOVE, the lug nuts that fasten the wheel to the hub with the tire iron or breaker bar BEFORE raising up your vehicle.
- Slide an automotive jack under the vehicle at an appropriate lift point and raise the vehicle enough to lift a single tire completely off the ground. Place a jack stand under your vehicle, and lower your vehicle on to the jack stand. Never work on or under a vehicle which is lifted only with an automotive jack, because it can easily fall or tip, causing injury or death.
- Finish removing the lug nuts on the raised tire. Slide the wheel off the hub and set it aside. Spray degreaser on the lug studs and wipe them down with a rag. If the hub is dirty, rusted, or pitted use a wire brush to clean up the surface. Wipe down the entire hub surface, making sure it is clean and smooth.
- If you are using Loctite to secure your spacer/adapter, place a drop of loctite on each wheel stud. Place your wheel spacer/adapter on to the hub, with the holes in the spacer lined up with the wheel studs, making sure the wheel spacer seats firmly against the hub. Attach the wheel spacer to your hub using the included bolts. Tighten the nuts that hold the spacer in place to the appropriate torque specification using a torque wrench. Do not overtighten or undertighten the nuts. If you have difficulty tightening the nuts because the hubs turn, have an assistant gently press the brake pedal to prevent the hub from turning.
- Slide the wheel onto the studs protruding from the wheel spacer/adapter so that it seats firmly against the spacer/adapter. Install your original lug nuts and tighten them to the appropriate torque specification. Tighten bolts in a star pattern to ensure proper seating of the wheel onto the spacer. Raise the vehicle with the automotive jack, remove the jack stand and lower the vehicle onto the newly installed wheel.
- Repeat steps 3-6 for each wheel.
- Double check that all lug nuts are tightened to the manufacturer’s specification MINUS 10% with a properly calibrated torque wrench in a crisscross, star pattern. In our experience tightening all the way to manufacturer torque specifications can occasionally damage/break /weaken the studs on the wheel spacer. However it is always a good idea to routinely check the tightness of the lug nuts, especially soon after installation.
Item SpecificsManufacturer Part Number :LJT823493LJTBrand :LJTMaterial :High Quality t6 6061 Billet AluminumThickness :15mmWheel bolt pattern :5x4.5" or 5x114.3mmVehicle bolt pattern :5x3.9" or 5x100mmThread pitch :12mm x 1.25 or 12x1.25 or M12x1.25Hub/Center Bore :56.1mmWarranty :1 yearTorqued Down By Hand At :80 FT/LBSLug Patterns :5LugsCondition :NewStud Grade :10.9Quantity :4pcsOther Part Number :Fits Subaru Impreza 1997 2002 2015 2017 Subaru Legacy 2012Interchange Part Number :Fits Subaru Forester 2006 2008 Scion FR-S 2013 2012 2010Superseded Part Number :15mm Thick Wheel Spacers Adapters M12x1.25Color :SliverPackage Weight :7.94lbPlace of delivery :Ontario,CaliforniaNote :Only works with 5x114.3mm (5x4.5") Wheels
Payment
We accept paypal only
We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
About Shipping1.Items will be shipped within 24 hours after getting your verified payment.
2.US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time
About Return• We will gladly accept your return within 30 days of the original purchase.
• Our return process is simple and fast:
1. We will pay for the return shipping label if you received a broken / defective item(s) or the item(s) doesn't match our description. As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.
2. You will be required to pay for the return shipping label if you changed your mind or no longer need the item(s). As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.
• If we'll receive a package back because of the incorrect address, the refund will be processed excluding our shipping cost.
Fitment NotesPlease consult with your mechanic, or contact us, if you are not sure of fitment for your vehicle. READ the notes on the compatibility chart.
We are not responsible for incompatible items due to buyer's error, and a restocking fee as well as shipping charges will be deducted from returns or exchanges.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home Brake Rotors & Pads◈Brake Rotors◈Brake Pads◈Brake Rotors and Pads Towing Mirrors Wheel Hub Bearing Timing Belt Kits Door Handle Wheel Spacers Water Pump Fuel Pumps Fuel Injector Car Seat Cover Car Cover Suspension Kit◈suspension kit-cj◈Suspension Kit okx◈Suspension Kit fu Leveling lift kit Wheel Lug Nuts ABS Wheel Speed Sensor Knock SensorHot Item Front Ceramic Brake Pads For Acura ILX Honda Accord CR-V Element Fit Pilot USD 37.07 Rear Ceramic Brake Pads For Infiniti EX35 FX37 G35 JX35 Nissan 350Z Suzuki USD 26.52 Rear Ceramic Brake Pads For Audi A4 TT A6 Volkswagen Beetle Jetta USD 27.51 Rear Ceramic Brake Pads For Acura Integra Honda Accord Suzuki Kizashi USD 23.17 Tailgate Handle & Bezel Trim Kit Set For 1999-07 Chevy Silverado GMC Sierra USD 21.11 DeliveryNew List Item Alternator Compatible With Chevy Blazer S10 4.3L 1998 1999 2000 10480251 8231 USD 80.25 Front Brake Ceramic Pads and Rotors For Honda Accord 2003 2004 2005 2006 2007 USD 91.58 Rear Ceramic Brake Pads For Nissan Pathfinder 2006-2007 Nissan Xterra USD 34.66 Rear Brake Rotors & Metallic Pads For Chrysler Dodge Ram C/V Volkswagen Routan USD 110.03 4 Piece Front Inner Outer Tie Rod End Link Suspension Kit For 2003-10 Chevrolet USD 49.08 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us (4) 5x100 to 5x114.3 Hubcentric Wheel Adapters 15mm For Subaru Impreza ForesterApplications:
- 2005-2006 Saab 9-2X
- 2013-2016 Scion FR-S
- 2003-2006 Subaru Baja
- 2013-2020 Subaru BRZ
- 1998-2018 Subaru Forester
- 1993-2003 Subaru Impreza
- 2004-2021 Subaru Impreza (Will not fit STI)
- 1990-2014 Subaru Legacy
- 2000-2013 Subaru Outback
- 2017-2020 Toyota 86
Feature:
- Precisely Machined: Forged 6061 T6 Aluminum CNC machined heavy duty spacers and studs for safety with ISO/DIN 10.9 (SAE Grade 8).
- Forged spacers are more heavy duty and Durable than casting, stronger and safety package with Foam inner.
- It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle.
- Be sure to torque the lug nuts to manufacturer specifications.
- Avoid an impact wrench; improper usage may cause damage to components.
- Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
- No returns or exchange once installed.
​
How to measure the fender gap to choose suitable thickness?
(1)Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
(2)Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
How to Install Wheel Spacers?
- Always make sure you are installing wheel spacers/adapters that are designed for your vehicle. Never use wheel spacers/adapters which do not fit properly.
- Park your vehicle on a hard, level surface. Break loose, but DO NOT REMOVE, the lug nuts that fasten the wheel to the hub with the tire iron or breaker bar BEFORE raising up your vehicle.
- Slide an automotive jack under the vehicle at an appropriate lift point and raise the vehicle enough to lift a single tire completely off the ground. Place a jack stand under your vehicle, and lower your vehicle on to the jack stand. Never work on or under a vehicle which is lifted only with an automotive jack, because it can easily fall or tip, causing injury or death.
- Finish removing the lug nuts on the raised tire. Slide the wheel off the hub and set it aside. Spray degreaser on the lug studs and wipe them down with a rag. If the hub is dirty, rusted, or pitted use a wire brush to clean up the surface. Wipe down the entire hub surface, making sure it is clean and smooth.
- If you are using Loctite to secure your spacer/adapter, place a drop of loctite on each wheel stud. Place your wheel spacer/adapter on to the hub, with the holes in the spacer lined up with the wheel studs, making sure the wheel spacer seats firmly against the hub. Attach the wheel spacer to your hub using the included bolts. Tighten the nuts that hold the spacer in place to the appropriate torque specification using a torque wrench. Do not overtighten or undertighten the nuts. If you have difficulty tightening the nuts because the hubs turn, have an assistant gently press the brake pedal to prevent the hub from turning.
- Slide the wheel onto the studs protruding from the wheel spacer/adapter so that it seats firmly against the spacer/adapter. Install your original lug nuts and tighten them to the appropriate torque specification. Tighten bolts in a star pattern to ensure proper seating of the wheel onto the spacer. Raise the vehicle with the automotive jack, remove the jack stand and lower the vehicle onto the newly installed wheel.
- Repeat steps 3-6 for each wheel.
- Double check that all lug nuts are tightened to the manufacturer’s specification MINUS 10% with a properly calibrated torque wrench in a crisscross, star pattern. In our experience tightening all the way to manufacturer torque specifications can occasionally damage/break /weaken the studs on the wheel spacer. However it is always a good idea to routinely check the tightness of the lug nuts, especially soon after installation.
PaymentAbout ShippingAbout ReturnFitment Notes
We accept paypal only
We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
1.Items will be shipped within 24 hours after getting your verified payment.
2.US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time
• We will gladly accept your return within 30 days of the original purchase.
• Our return process is simple and fast:
1. We will pay for the return shipping label if you received a broken / defective item(s) or the item(s) doesn't match our description. As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.
2. You will be required to pay for the return shipping label if you changed your mind or no longer need the item(s). As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.
• If we'll receive a package back because of the incorrect address, the refund will be processed excluding our shipping cost.
Please consult with your mechanic, or contact us, if you are not sure of fitment for your vehicle. READ the notes on the compatibility chart.
We are not responsible for incompatible items due to buyer's error, and a restocking fee as well as shipping charges will be deducted from returns or exchanges.
All right reserved.